发布时间:2020-08-26 14:21 来源:bilibili 作者:冷库黄
VNAV SPD
收起VNAV SPD
VNAV SPD works similar to FLCH SPD but the speed is managed by the FMS and the speed window is blanked.
To engage VNAV SPD:
Selected a higher altitude in the MCP altitude window. To do this move your mouse cursor over the altitude knob and use your scroll wheel.
If VNAV was already engaged before click the altitude select knob
If not: Press the VNAV button to engage VNAV.
Note - VNAV SPD can also be activated in the descent, when the aircraft is above the programmed vertical profile for example or when the speed is more important than the vertical path, e.g. when slowing down.
VNAV SPD的工作方式与FLCH SPD相似,但是速度由FMS管理,并且速度窗口为空白。
启用VNAV SPD:
VNAV SPD
在MCP高度窗口中选择了更高的高度。为此,将鼠标光标移到海拔旋钮上,然后使用滚轮。
如果在单击海拔选择旋钮之前已经使用了VNAV
如果不是,请执行以下操作:按下VNAV按钮以启用VNAV。
注意 -例如,当飞机高于设定的垂直计划时,或者当速度比垂直路径更重要时(例如,减速时),也可以在下降中激活VNAV SPD。
上一篇: 英雄传说创之轨迹全AT奖励效果列表