微软模拟飞行2020空中客车A320Neo通用飞行教程

高度旋钮

Turn the knob to set a new target altitude that the autopilot is allowed to fly to.

Pushing the altitude knob performs a managed climb (CLB) or descent (DES) towards the selected altitude when you have a route programmed. It does nothing if there is no route nearby and it only works if you are already flying along the route in NAV mode. With this mode the autopilot will automatically level off at altitude constraints if the flight plan requires that.

Pulling the altitude knob tells the autopilot to immediately climb or descent to the selected altitude without any restrictions in open climb (OP CLB) or open descent (OP DES) modes.

旋转旋钮以设置允许自动驾驶仪飞行的新目标高度。

设定了路线后，按海拔高度旋钮可向选定的海拔高度执行受控爬升(CLB)或下降(DES)。如果附近没有路线，它什么也不做，只有在您已经以NAV模式沿着路线飞行时，它才起作用。在这种模式下，如果飞行计划需要，自动驾驶仪将在高度限制条件下自动平放。

拉动高度旋钮，可让自动驾驶仪立即爬升或下降到选定的高度，而在开放爬升(OP CLB)或开放下降(OP DES)模式下没有任何限制。