微软模拟飞行2020空中客车A320Neo通用飞行教程

飞行计划 Flight-Plan 页面

选择出发地

From the flight plan page press the left line select key on the first line (LSK 1L) next to the departure airport ICAO identifier to select the departure airport and to perform a so called lateral revision (LAT REV).

Select the menu option DEPARTURE with the LSK 1L.

Use up/down the arrow keys on the MCDU to scroll through the departure runways if needed, press the left side line select key that is next to the runway “16R”.

Select the line select key in the lower right corner “TMPY INSERT” to execute the temporary flight plan.

在飞行计划页面中，在出发机场ICAO标识符旁边的第一行(LSK 1L)上按左行选择键，以选择出发机场并执行所谓的横向修订(LAT REV)。

使用LSK 1L选择菜单选项DEPARTURE。

如果需要，使用MCDU上的上/下箭头键滚动查看出发跑道，然后按下跑道“ 16R”旁边的左侧线选择键。

选择右下角“ TMPY INSERT”的线路选择键以执行临时飞行计划。

选择一个到达

From the flight plan page press the lower left line select key next to the destination ICAO identifier and from the LAT REV page select ARRIVAL.

Use the up/down arrows on the MCDU to scroll through the list until you see ILS28R (or just 28R works too). Push the up arrow to slide the contents of the page up, as if you were pushing a drum. Similarly push the down arrow to push the contents back down (scroll back up).

Select the line select key in the lower right corner “TMPY INSERT” to execute the temporary flight plan.

在飞行计划页面中，按目的地国际民航组织标识符旁边的左下方选择键，然后从LAT REV页面中选择ARRIVAL。

使用MCDU上的向上/向下箭头滚动列表，直到看到ILS28R(或者也可以使用28R)。按下向上箭头将页面内容向上滑动，就好像您在推动鼓一样。类似地，按下向下箭头可将内容向下推(向上滚动)。

选择右下角“ TMPY INSERT”的线路选择键以执行临时飞行计划。

添加航点

There are several ways to add waypoints to the flight plan. One option is manually typing the waypoint's name and then pressing the line select key where it should go in the list.

For the tutorial flight type OAK and click the line select key before the “28R” ILS approach.

有几种方法可以将航点添加到飞行计划中。一种选择是手动输入航路点的名称，然后在列表中应按其位置的行选择键。

对于本教程的航班类型OAK，然后在“ 28R” ILS进场之前单击线路选择键。